CR-39 PNTD, made in Texas

Plastic Nuclear Track Detectors (PNTD)

A plastic nuclear track detector (PNTD) is a polymer sheet that records individual charged particles as etchable tracks. The standard PNTD material is CR-39, also called PADC, and BlankSlate Innovation casts, cuts and polishes it in-house in Lubbock, Texas.

Standard PNTD is $2/cm2 in ~0.9 mm and 3 mm, and ships worldwide in as little as 3 business days. Below are the specifications, what the material records, and how exposed detectors are read out.

Terminology

Is a PNTD the Same as CR-39?

Usually, yes. PNTD is the general term for any plastic track detector, and CR-39 is by far the most common one. Different fields use different names for it. Space-radiation dosimetry and heavy-ion physics papers tend to write CR-39 PNTD. Radon and environmental work tends to say SSNTD, for solid-state nuclear track detector. European dosimetry often uses the polymer's chemical name, PADC.

If your protocol, proposal or reference paper specifies any of these, BSI's CR-39 is that material. As with any change of supplier, run a calibration exposure on your first lot; the supplier-switching plan covers how. For how CR-39 compares with other track detector materials such as LR-115, polycarbonate and mica, see the SSNTD materials guide.

Specifications

BSI CR-39 PNTD Specifications

Property BSI CR-39 PNTD
MaterialCR-39 / PADC, poly(allyl diglycol carbonate), a clear thermoset plastic
Standard thicknesses~0.9 mm and 3 mm; other thicknesses as custom orders
FormatsLaser-cut rectangles, discs and custom shapes; full sheets of roughly 26 × 26 cm
Records directlyAlpha particles (above ~200 keV), protons (well characterized from ~100 keV to 5 MeV), heavy ions above the LET threshold, fission fragments
Records indirectlyNeutrons, through recoil protons or a boron nitride converter coating
Does not recordGamma rays, X-rays, electrons and beta particles
Detection thresholdAbout 0.8 MeV/(mg/cm2) in dE/dx; species-dependent
Reference etch6.25 M NaOH at 80 °C
Neutron optionIn-house boron nitride coating, $5/cm2 (peer-reviewed)
Price$2/cm2 standard; $100 minimum order; bulk discounts above 100 chips
Lead timeAs little as 3 business days; large orders up to 4 weeks
Made inLubbock, Texas, USA
Ships toWorldwide, DAP or DDP at the buyer's choice

Handling, storage, etching and imaging details are in the CR-39 best-practice guide, which also covers stacked-detector and low-Earth-orbit experiment design.

Applications

Where Are PNTDs Used?

Space and Cosmic-Ray Dosimetry

PNTDs record the high-LET part of the radiation field: heavy ions and target fragments. They are typically flown alongside thermoluminescent detectors, which cover the low-LET part.

Heavy-Ion and Accelerator Beams

Beam fluence, profile and fragmentation measurements, where each track is one ion and a stack of detectors samples the beam at several depths.

Fusion and Laser-Driven Ions

Charged fusion products and accelerated ions recorded in a strong X-ray and EMP environment. See CR-39 for fusion diagnostics.

Neutron Dosimetry

Fast neutrons through recoil protons, and thermal neutrons with a boron converter. See neutron-sensitized CR-39.

Readout

From Exposed PNTD to LET Spectrum

You can etch and read BSI PNTDs with your own microscope or reader, or ship exposed detectors back to us. BSI's readout uses SEM large-area mapping and an AI track classifier, so there is no automated reader to buy.

Depending on what you order, results range from a particle count or flux across the full chip area to particle species, energy and LET distributions, angle of arrival and the raw track data. Every analysis separates real particle tracks from artifacts. Turnaround is 10 to 30 days from receipt, and pricing is quoted per project.

Questions buyers ask

PNTD FAQ

What is a plastic nuclear track detector (PNTD)?

A plastic nuclear track detector (PNTD) is a sheet of polymer that records individual charged particles. Each particle breaks chemical bonds along its path, and etching the plastic in a hot alkaline solution enlarges that damage into a pit visible under a microscope. PNTDs are passive: they need no power or electronics during exposure. The standard PNTD material is CR-39, also called PADC.

Is a PNTD the same thing as CR-39?

Usually, yes. PNTD is the general term for any plastic track detector, and CR-39, which is poly(allyl diglycol carbonate) or PADC, is by far the most common one. Space-dosimetry and heavy-ion papers often write CR-39 PNTD. Other plastics, such as cellulose nitrate and polycarbonate, are also PNTDs, but CR-39 is the most sensitive of the common ones. BSI's PNTDs are CR-39.

What particles does a CR-39 PNTD record?

CR-39 records alpha particles, protons, heavy ions and fission fragments directly. BSI has good experimental experience with protons from about 100 keV to 5 MeV and with alpha particles above about 200 keV. Neutrons are detected indirectly, through recoil protons or a boron converter coating. Gamma rays, X-rays and beta particles do not leave tracks.

How much do PNTDs cost, and how fast do they ship?

BSI's standard CR-39 PNTD is $2 per cm² and boron-coated, neutron-sensitive material is $5 per cm². The minimum order is $100, with bulk discounts above 100 chips. Standard thicknesses are approximately 0.9 mm and 3 mm. Orders ship from Lubbock, Texas in as little as 3 business days; large orders can take up to 4 weeks.

Can BSI read out exposed PNTDs?

Yes. Exposed detectors can be shipped back to BSI for SEM large-area mapping and AI track analysis. Depending on what you order, results range from a particle count or flux across the full chip to particle species, energy and LET distributions, angle of arrival and the raw track data. Turnaround is 10 to 30 days from receipt, and pricing is quoted per project.

Does BSI ship PNTDs outside the United States?

Yes. BSI ships CR-39 PNTDs worldwide from Lubbock, Texas at the same US-dollar prices and $100 minimum order. Buyers choose DAP or DDP shipping terms and can pay by wire transfer, credit card, purchase order or PayPal. International customers can also use the ship-back analysis service.

Get started

Order CR-39 PNTD

Tell us the chip size, thickness and quantity you need and what you plan to detect. We'll quote your order, and can hold material from a single cast lot so one calibration covers a whole campaign.

Related: CR-39 product overview · SSNTD materials guide · international ordering · ADC monomer